Suitable applications
Suitable for medium-small CNC machines, automation equipment, replacement work, and distributor stock requiring higher rigidity.
Model page
The 2005 ball screw has a 20 mm diameter and 5 mm lead. It is used when medium-small equipment needs more rigidity and load capacity than the 16 mm series.
2005
| Diameter | 20 mm |
|---|---|
| Lead | 5 mm |
| Series | SFS / SFU / DFS / DFI |
| Common lengths | 500 mm, 800 mm, 1000 mm, 1500 mm |
| Nut pairing | Flange nut for common CNC and automation assemblies |
| Accuracy grade | C7 rolled standard, C5 ground available |
Suitable for medium-small CNC machines, automation equipment, replacement work, and distributor stock requiring higher rigidity.
The 5 mm lead favors thrust and positioning control, while travel speed is lower than 2010. Confirm load, installation space, and expected speed.
2005 is a common medium-size model for distributors expanding from 16 mm models toward higher load capacity.
The same screw diameter and lead can use different nut variants. Check nut length, flange dimensions, and mounting holes against the full nut model. These SFU dimensions are separate from the DIN69051 Form B series.

| Full nut model | d | l | Da | n | D | D2 | D3 | D4 | L | B | G | H | Ca (kgf) | Coa (kgf) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFU2005-3 | 20 | 5 | 3.175 | 3 | 36 | 58 | 47 | 6.7 | 42 | 10 | M6 | 44 | 860 | 1710 |
| SFU2005-4 | 20 | 5 | 3.175 | 4 | 36 | 58 | 47 | 6.7 | 51 | 10 | M6 | 44 | 1130 | 2380 |
d: shaft diameter; l: lead; Da: ball diameter; n: turns; D: nut diameter; D2: flange diameter; D3: mounting-hole pitch circle diameter; D4: through-hole diameter; L: nut length; B: flange thickness; G: oil-hole thread; H: flange width across flats; Ca: basic dynamic load rating; Coa: basic static load rating.
Specify the full nut model or send photos and dimensions of the existing part. Confirm total length, end machining, support units, and accuracy for your order. Use the confirmed drawing for production.
FAQ
Common questions about selection, specification confirmation, and stocking. Confirming these details first makes quoting faster.
The 20 mm diameter provides higher rigidity and load capacity for medium-small equipment that needs more stability than the 16 mm series.
The 2005 has a 5 mm lead that favors thrust and positioning control at lower travel speed. Choose 2010 when higher speed matters. Confirm load, installation space, and expected speed.
Provide length, nut type, quantity, packing, and the target machine. Attach a drawing or installation dimensions for end machining. Distributors can also confirm common stock lengths and labeling.
+8615268772262
Leave your question or requirement and we will continue in WhatsApp.
Continue in WhatsApp