Model page

1605 ball screw

The 1605 ball screw has a 16 mm diameter and 5 mm lead. It is commonly used for small CNC machines, automation slides, replacement work, and distributor stock where stable positioning matters more than high travel speed.

1605

Core specifications and RFQ information

Diameter16 mm
Lead5 mm
SeriesSFS / SFU / DFS / DFI
Common lengths300 mm, 500 mm, 800 mm, 1000 mm
Nut pairingSingle flange nut or standard matching nut
Accuracy gradeC7 rolled standard, C5 ground available

Suitable applications

Suitable for small CNC machines, automation slides, replacement work, and distributor stock.

Speed / thrust trade-off

The 5 mm lead supports thrust and positioning control, while travel speed is usually lower than 1610. Compare with 1610 when higher travel speed is required.

Distributor stock

1605 is a practical stock model for distributors when common lengths, matching nuts, and packing rules are confirmed.

SFU nut variants and mounting dimensions

The same screw diameter and lead can use different nut variants. Check nut length, flange dimensions, and mounting holes against the full nut model. These SFU dimensions are separate from the DIN69051 Form B series.

SFU nut side view and flange mounting dimension drawing
Source: WEEMT product catalog, PDF page 8, printed page 10. Dimensions in mm; Ca/Coa in kgf. Catalog conversion: 1 kgf = 9.8 N.
Full nut modeldlDanDD2D3D4LBGHCa (kgf)Coa (kgf)
SFU1605-31653.17532848385.54210M6407801790
SFU1605-41653.17542848385.55010M6407801790

d: shaft diameter; l: lead; Da: ball diameter; n: turns; D: nut diameter; D2: flange diameter; D3: mounting-hole pitch circle diameter; D4: through-hole diameter; L: nut length; B: flange thickness; G: oil-hole thread; H: flange width across flats; Ca: basic dynamic load rating; Coa: basic static load rating.

Specify the full nut model or send photos and dimensions of the existing part. Confirm total length, end machining, support units, and accuracy for your order. Use the confirmed drawing for production.

FAQ

Model FAQ

Common questions about selection, specification confirmation, and stocking. Confirming these details first makes quoting faster.

How do I choose between 1605 and 1610?

The 1605 has a 5 mm lead for better thrust and positioning control at lower travel speed. Compare 1610 when the axis needs faster movement. Confirm load, speed, and stroke together during selection.

What information is needed for a quotation?

Provide length, nut type, quantity, packing requirements, and the target machine. If end machining or support units are needed, include a drawing or installation dimensions.

Is the 1605 suitable for replacement work?

Yes. Small CNC machines, automation slides, and replacement work are common applications. When replacing an old part, measure total length, threaded length, shaft-end structure, and nut form.